Advertisement
TTLock Smartek Nightlatch Smart Lock - Installation Guide
This shows how to replace a keyed cylinder with a nightlatch smart lock. Most 60mm nightlatch locks
are compatible including, Yale, Era, Legge, Union & Asec. Banham locks are not compatible.
1. This shows the existing nightlatch keyed cylinder. This is the
part that will be replaced.
3. Remove the two screws that holds the keyed cylinder in place.
Leave the back plate in place. Keep the screws .
5. Align the keyed cylinder with the lock handle and mark the
length of the tail.
2. On the inside of the door, remove the nightlatch. It is usually
secured by two screws.
4. Remove the keyed cylinder from the door. Keep hold of the ring.
6. With a hacksaw, cut the tail to the correct length.
Advertisement
Table of Contents
Related Manuals for TTLOCK Smartek Nightlatch
Summary of Contents for TTLOCK Smartek Nightlatch
- Page 1 TTLock Smartek Nightlatch Smart Lock - Installation Guide This shows how to replace a keyed cylinder with a nightlatch smart lock. Most 60mm nightlatch locks are compatible including, Yale, Era, Legge, Union & Asec. Banham locks are not compatible. 1. This shows the existing nightlatch keyed cylinder. This is the 2.
- Page 2 Now go to the User Manual, start at page 6 and follow the instructions. This will explain how to insert a CR123A battery (not included) and how to add the lock to the free TTLock smartphone app. TIP: If using outdoors we recommend that the fingerprint sensor faces the ground to keep it clean...
Need help?
Do you have a question about the Smartek Nightlatch and is the answer not in the manual?
Questions and answers