Petlibro PLAF203 User Manual page 7

Notes:
• To remove the TF (Micro SD) Card, push in the TF card lightly.
For privacy, the video les in the TF card can only be checked
through the Replay section in the APP, and can not be read by
•
PC/phone.
10
2. Connect Power
1) Plug the 5V power adapter into a power socket and the USB cable
into the USB port on the back of the feeder.
2) The LED display will light up automatically to indicate the feeder
is on.
3) Open the battery compartment at the bottom of the feeder.
Install three alkaline D batteries (not included) in case of a power
outage. Make sure the batteries match the positive and negative
poles with the markings in the compartment.
Notes：
•
Batteries are not included.
•
To avoid sudden power outage and the feeding of your pet is
a ected, do not use the batteries as the only source to power
the feeder, the batteries can only be used as an emergency plan.
To avoid battery leakage, remove the batteries if the device
won't be in use for a period of time.
•
X 3
Bottom view
11