Privacy Masks - Sanyo VCC-ZM600P Installation Manual

Day/Night Function
According to the luminance level, the
viewing mode will be switched
automatically between the color mode
and the black/white mode.
You can adjust the luminance threshold
for switching the viewing mode.
LOW MID HIGH
B/W B/W B/W
Switchover point
&
[CAMERA] ⇒ [DAY/NIGHT] ⇒
[AUTO] ⇒ [LEVEL]
Backlight Compensation
b The camera uses 48-part split
metering areas to compensate the
backlight condition by metering each
area.
You can also select 5-part split
metering areas (center, left, right, top
and bottom) for metering.
&
[CAMERA] ⇒ [BLC] ⇒ [MULT] or
[CENT]
b You can mask a metering area you do
not want to meter.
&
[CAMERA] ⇒ [BLC] ⇒ [MASK]
Color Color Color
8
White Balance Adjustment
In addition to the white balance
adjustment, you can use the mask
patterns to cover extremely bright or
dark light source in the monitored image
so that the white balance adjustment is
properly configured.
&
[CAMERA] ⇒ [WHITE BALANCE] ⇒
[ATW] ⇒ [MASKING]

Privacy Masks

The privacy masks can be used to
protect privacy by hiding certain part of
the monitored image.
(Maximum 4 masks)
&
[PRIVACY MASK]
Shutter Speed Settings
The camera can monitor a fast-moving
object.
&
[CAMERA] ⇒ [SHUTTER]