Sanyo PDG-DET100L Owner's Manual page 61

Filter counter
This function is used to set a time for the filter replacement.
Use the Point ed buttons to move the red frame pointer to Filter
counter and then press the SELECT button. A dialog box appears
showing the Used time option and the Scrolls remaining option.
Used Time . . . . . . Show the total accumulated time of the
filter use, timer setting option and the Reset
options. When the projector reaches a time
set in the timer setting, the Filter replacement
icon (Fig. 1) appears on the screen and the
total accumulated time turns red, indicating
that the filter replacement is necessary. If
the filter is out of scroll and the projector
reaches a time set in the timer setting, Fig.
2 appears on the screen, indicating that the
filter cartridge replacement is necessary.
Scrolls remaining . . Show the scroll counter and the Reset
options. When the filter scroll is counted
down to 1 (Scroll counter on the screen is
showing "0 scroll(s)" , the last scroll icon
(Fig. 3) appears on the screen. When the
filter scroll is counted down to 0, the Filter
cartridge replacement icon (Fig. 4) appears
on the screen and the WARNING FILTER
indicator lights orange, indicating that the
filter cartridge replacement is necessary.
To set a timer, press the SELECT button on Used time option.
Move the red arrow pointer to the timer setting option and use
the Point 7 8 buttons to select from (Off/1000H/2000H/3000H)
depending on the use environment.
When replacing the Filter cartridge, reset the Filter counter and the
Scroll counter (p.64).
✔ Note:
•Do not reset the Filter counter and the Scroll counter
without replacing the Filter cartridge. Be sure to reset the
Filter counter and the Scroll counter only after replacing
the Filter cartridge.
•Timer setting notifies that the filter needs replacement. To
replace the filter, use the filter control function (p.56).
Test pattern
Various test patterns are available for use when setting up the
projector.
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock, lamp counter, filter counter
and filter timer to the factory default settings.
Quit
Exit the Setting Menu.
Filter counter
Set the red frame pointer
to the item and press the
SELECT button.
Filter replacement icon appears on the screen
at a set time.
Fig .1 Filter replacement icon
Fig .2
Last scroll icon appears on the screen when
the filter is down to the last scroll.
Fig .3 Last scroll icon
Filter cartridge replacement icon appears on
the screen when the filter scroll is counted
down to 0 scroll.
Fig .4 Filter cartridge replacement icon
✔
Note:
• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will appear at
turning on and selecting input source.
• Fig.1, Fig. 2, Fig. 3 or Fig. 4 will not appear
when the Display function is set to "Off"
(p.49), or during "Freeze" (p.30).
• If the filter cartridge is not installed in the
projector, 'Filter counter' is displayed in
grayout.
Factory default
Set the red frame pointer
to the item and press the
SELECT button.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
Setting
Off
Select [Yes] to
activate it.
61