Troubleshooting - Sanyo VPC-E1075 Instruction Manual

56 Troubleshooting

Troubleshooting
Problem
Camera does not turn on
Camera turns off
automatically
LCD turns off automatically
Empty battery icon is
displayed on the LCD then
camera turns off
LCD screen displays 'Card
Requires Formatting'
LCD screen displays 'Card
is Full'
LCD screen displays 'Card
is locked'
Insufficient memory space
to complete request
No image displays on the
TV screen
Insufficient space on the
card
Action
• The battery may be exhausted. Charge or replace
the battery.
• The battery is installed incorrectly. Re-insert the
battery observing the correct polarity.
Press the Power button again to turn on the camera.
Press any button to turn on the LCD, when AUTO
LCD ON mode (30 SEC or 1 MIN) is achieved.
Battery is exhausted. Charge or replace the battery.
Memory card format not recognized. Re-format the
memory card.
Memory card is full. Replace the memory card with a
new one or delete unnecessary images from the
existing card.
The card is protected by a protect switch
mechanism. Move the switch to the unlock position.
Insufficient space in memory to rotate an image.
Delete unnecessary images.
Incorrect TV-out type was selected. Set correct
TV-out type to match your TV system.
Delete unnecessary images.