SKLZ PRO MINI HOOP SYSTEM Instruction Manual page 7

22
22
24
31
1
33
34
37
2
3
28
35
4
3
5
Pro Mini Hoop System Assembly Guide
32
25
32
27
38
27
or
14 6
ASSEMBLY INSTRUCTIONS
STEP 3
ASSEMBLE BACKBOARD TO BASE
1 - Attach Height Adjustment Pole (31) to Lower
Backboard Support Poles (22) with Short Spacers
(32) using M8X85 bolts (24) and nuts (25).
2 - Slide Height Adjustment Slider (33) from base
of pole over the Top Pole (27) and secure with
Height Adjustment Pin (34) before attaching
Height Adjustment Pole (31) using
M8X40 bolt (37) and nut (38).
3 - Attach entire Backboard assembly to Base
assembly by sliding the Top Pole (27) onto the
Center Pole (14) or Bottom Pole (6) until it clicks.
4 - Attach the Net (35) to the Rim (28) by looping the
long end of the net over the metal loops.
5 - Completely fill Base (3) with sand and/or water
and replace cap before play.
4
CAUTION
IF USING WATER IN SUB-FREEZING CLIMATES, ADD ½ GALLON
OF NONTOXIC ANTIFREEZE TO 9½ GALLONS WATER.
WHEN THERE IS NO WEIGHT IN THE BASE, DO NOT LEAVE
UNATTENDED. THE UNIT COULD TIP OVER AND COULD
RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
1
2
7