Page 2
BLANCO INMOTION Heated Tray Transport Trolleys General information Warranty This unit was manufactured with care using high quality materials and modern production techniques. The period of warranty from the date of purchase for this Gerätis 24 months and for wearing parts and electrical parts six months. The warranty encompasses all the malfunctions and faults arising through the material and manufacturing.
It may not be used as a room heater. Used together with pre cooled eutectic plates (coolant accumulators), the BLANCO INMOTION tray transport trolley can be used to refrigerate food for a short time while heating is turned off. The BLANCO INMOTION tray transport trolley is not suitable for refrigeration of food for longer periods of time.
Page 6
BLANCO INMOTION Heated Tray Transport Trolley The unit designation contains an abbreviation of the unit model. TTW stands for tray transport trolley, F for hinged door. The subsequent numbers and letters have the following meaning: The first and second digit refer to the tray capacity (16, 20, 24, 30, 32, 40 trays), e.
BLANCO INMOTION Heated Tray Transport Trolley Standard model The standard model of the heated BLANCO INMOTION tray transport trolley features: Double walled unit body made of stainless steel Up to three compartments, depending on the model Operating elements on the short side of the unit...
BLANCO INMOTION Heated Tray Transport Trolley Safety General information The unit has been built using state of the art technology. Accordingly, all the requirements necessary for safe operation have been fulfilled. Additional dangers do nevertheless exist when the unit is operated. The safety precautions and warnings in these operating instructions are there to help you protect yourself against these sources of danger.
If damage is present, secure the unit against accidental use and have repairs carried out immediately at one of the following locations: In house, by BLANCO trained technician Externally, by BLANCO trained customer service engineer BLANCO Service Always secure the unit from rolling away by setting the locking brakes. The unit can cause injuries and damage to property if allowed to roll away accidentally.
BLANCO INMOTION Heated Tray Transport Trolley Warm unit exterior and hot unit rear wall The unit exterior becomes warm during temperature maintenance. The rear wall of the unit, which contains the heating element, becomes hot. Do not place objects or food items which are sensitive to heat on the unit top.
If the effectiveness of the brakes is not sufficient, have the defective castor replaced immediately by one of the following: In house, by BLANCO trained technician Externally, by BLANCO trained customer service engineer BLANCO Service Electrical safety: Re-inspection At least once every six months, have a periodical electrical safety inspection carried out by a professional electrician in accordance with the DIN VDE 0702 series of standards.
Retain the unit and notify BLANCO of the damage, enclosing the waybill. – or – Do not accept the unit and return it to BLANCO via the carrier. This procedure will ensure correct processing of claims. If the transportation damage is reported later the consignée of the unit must provide evidence of this.
Packaging materials can be handed over to a recycling center after material quoting the disposal contract number. If you cannot find the disposal contract number, it can be obtained by contacting BLANCO Service. Dispose of packaging material correctly and in an environmentally responsible manner.
Heating up empty unit for the first time During the initial startup, the insulation material which becomes hot may cause an unpleasant odor. For this reason, BLANCO recommends heating the unit empty for approx. 2 hours before the initial use.
BLANCO INMOTION Heated Tray Transport Trolley Set rotary knob of temperature control to the highest level. Heat unit approx. 2 hours. Switch off heating of the unit compartment(s) with the On/Off switch. The operation indicator LED goes out. Air out all unit compartments.
BLANCO INMOTION Heated Tray Transport Trolley Operation Unit overview (1) Railing (optional) (2) Push handle (optional) (3) Support ledge (4) Tip safety (optional) (5) Unit door: locked at side wall (6) Door handle with door lock (7) Unit door (8) Corner guard...
BLANCO INMOTION Heated Tray Transport Trolley Overview of temperature regulation (1) Operation indicator LED (2) On/Off switch (3) Rotary knob for setting the setpoint temperature in the unit The desired setpoint temperature in the unit can be set continuously via the rotary knob.
BLANCO INMOTION Heated Tray Transport Trolley Switch on heating of the unit compartment(s) with the On/Off switch. The operation indicator LED illuminates. Change the setpoint temperature if necessary. Subsection "Setting the setpoint temperature" on Page 13. Preheat the unit for at least 60 minutes.
BLANCO INMOTION Heated Tray Transport Trolley Open the unit door completely (270°) and press onto the short side of the unit. The door catch (1.) is felt to engage in the door lock (2.). Closing unit door Release the unit door by pulling it.
Page 20
BLANCO INMOTION Heated Tray Transport Trolley In the rest position, the hitch is pressed up against the side wall of the unit with a spring. For connection of the hitch to the fastening pin of the other unit, the hitch is folded down.
BLANCO INMOTION Heated Tray Transport Trolley Moving unit to a new location If the driving route is uneven, measures must be taken. Chapter "Traversing ramps, recesses, slanted surfaces" on Page 19. Do not place objects on top of the unit The unit door(s) is/are closed Switch off heating of the unit compartment(s) with the On/Off switch.
Page 22
BLANCO INMOTION Heated Tray Transport Trolley Warning! Limited field of vision! When pushing the unit, a person in front of the unit can be overlooked and injured. The unit or an object before the unit can be damaged due to limited field of vision.
BLANCO INMOTION Heated Tray Transport Trolley Traversing ramps, recesses, Two people slanted surfaces Load the unit from the bottom up when loading partially Warning! The trolley can tip! The unit can tip over when traversing a slanted surface. Never move the unit across a surface (e. g. ramp) with an incline > 10°.
BLANCO INMOTION Heated Tray Transport Trolley Refrigerating food The main application of the unit is temperature maintenance of food. In combination with pre cooled eutectic plates (coolant accumulators), the unit can be used for the short term refrigeration of food. The pre cooled eutectic plates must be completely solidified to achieve a maximum refrigeration.
BLANCO INMOTION Heated Tray Transport Trolley Shutting down Shutting the unit down Warning! Danger of children being trapped inside due to locked unit door! Children who climb into an empty tray transport trolley and lock the unit door cannot get out unassisted.
BLANCO INMOTION Heated Tray Transport Trolley Help in the event of problems Operation indicator LED does not illuminate Cause Action Power plug is unplugged. Plug the power plug into the electrical outlet. Power plug is damaged; a wire Have power plug replaced by a facility is broken, for example (can also authorized to carry out repairs.
BLANCO INMOTION Heated Tray Transport Trolley Unit exterior is damaged Cause Action Damage during transport, Shut the unit down. change of location or other Chapter "Shutting down" on external influence. Page 21. Secure the unit from being started up accidentally.
The prescribed cleaning method for routine daily cleaning is to wipe the unit over with a damp cloth. Persistent soiling may be removed with a brush (synthetic or natural bristles). Any other cleaning method must be approved by BLANCO. Do not use a steam jet device or high pressure cleaner. Cleaning agents...
Page 29
BLANCO INMOTION Heated Tray Transport Trolley Removing areas of corrosion New areas of corrosion on stainless steel Ensure that the power plug is unplugged. Remove areas of corrosion with a scouring agent or fine sandpaper. Older and more severe areas of corrosion...
Page 30
BLANCO INMOTION Heated Tray Transport Trolley Maintenance Having the unit regularly BLANCO recommends regular maintenance of the unit by appropriately maintained trained professionals. Regular maintenance prevents failure of the unit, extends its operating life and contributes to general value retention.
Page 31
In house, by BLANCO trained technician Externally, by BLANCO trained customer service engineer BLANCO Service Description of problem In addition to an exact description of the defect, BLANCO Service requires the following information from the rating plate: Article number Date of manufacture...
Page 32
BLANCO INMOTION Heated Tray Transport Trolley BLANCO CS GmbH + Co KG Address Catering Systems P. O. Box 13 10 75033 Oberderdingen GERMANY Phone +49 7045 44 81416 +49 7045 44 81508 E mail cs.service@blanco.de Internet www.blanco.de Disposal Disposing of the unit Make the unit unusable before disposing of it.
Page 33
BLANCO INMOTION Heated Tray Transport Trolley Technical data General data Dimensions and weights – TTW-F Tray Transport Trolley for Gastronorm trays (unit model with 160 mm castor diameter) Model Length Width Height Empty Max. in mm in mm in mm...
Page 34
BLANCO INMOTION Heated Tray Transport Trolley Dimensions and weights – TTW-F Tray Transport Trolley for Gastronorm and Euronorm trays (unit model with 160 mm castor diameter) Model Length Width Height Empty Max. load in mm in mm in mm weight...
Page 35
BLANCO INMOTION Heated Tray Transport Trolley Load-bearing capacity Component Permitted area load in kg Unit top Electrical data Connected loads Model Voltage Rating TTW F 16 115/105 DBEU 220 to 240 V AC, 50 to 60 Hz 900 W TTW F 20 115/105 DBEU...
Page 37
BLANCO INMOTION Heated Tray Transport Trolley Accessories Gastronorm/European norm Article numbers: BLANCOprice list trays Dishes Article numbers: BLANCOprice list Cloches Article numbers: BLANCOprice list Eutectic plates Article number: BLANCO price list Menu cards Article number: BLANCO price list BLANCO microfiber cleaning...
Page 38
BGR 111 (ZH1/37): Rules on safety and health protection for working in kitchens. DIN EN ISO 9001: BLANCO is certified in accordance with DIN EN ISO 9001. HKI quality mark: Collective mark of the German industry association for home, heating and kitchen technology (Industrieverband Haus , Heiz und Küchentechnik e.
Page 40
BLANCO CS GmbH + Co KG Catering Systems P. O. Box 13 10 75033 Oberderdingen GERMANY Phone +49 7045 44 81416 +49 7045 44 81508 E mail cs.service@blanco.de Internet www.blanco.de...
Need help?
Do you have a question about the INMOTION TTW-F 16-105 DBZE and is the answer not in the manual?
Questions and answers