Toto TX423MEB Manual

SPECIFICATIONS
Ø38
OPERATING CONDITIONS
Water supply pressure : 0.05 ~ 0.75 MPa.
1.
2.
Ensure that water supply is clean ( No Sand, Dirt, Etc.).
MAINTENANCE
Always wipe chrome plated area with dry soft cloth, and
sometimes wipe it with cloth soaked in mild soap.
ATTENTION
1. Don t use abrasive cleaning material such as; detergents
containing hydrochloric acids, thinner, polishing powder, and
nylon brush.
2. Flow Regulator should not be remove because it could damage
the system.
As the product model is constantly updated, the actual product
3.
may not look the same as it shown in the diagram, but the basic
installation principles are the same.
S060482
INSTALLATION
1
Screw
74 30 2
Tap
G½
45
107.5
3
Flexible Hose
EB HAND SHOWER SET W/ SINK TAP TX423MEB
2 X Ø5.5
Holes
Hanger
Sleeve
Anchor
Water
Supply
Use Seal Tape
(Not Include)
Hand Shower
Packing
Packing
TROUBLESHOOTING
CHECK
PROBLEM
POINT
Unsatisfactory spray
Water leaks around the hose
Water leaks around the handle
Handle is loose
1. NOZZLES
Flow Regulator Inside
(Don t remove)
6. BOLT
4. CERAMIC
2. NUT
HEAD WORK
5. CERAMIC
3. NUT
SOLUTION
1 Clean
2, 3 Tighten
4, 5 Tighten
6, 7 Tighten
HEAD WORK
7. BOLT