GE 20 Owner's Manual And Installation Instructions page 20

INSTALLING THE REFRIGERATOR
ATTACH FREEZER DOOR HANDLE
6
A Look for an arrow label on the front of the
handle. Hold the handle so that the arrow
is pointing to the left.
B Align keyhole slots on the right and left
sides of the back of the handle with the
screws mounted on the front of the
door/drawer. Press the handle against the
door/drawer front, making sure that the
screws go into the keyhole slots.
Holding the handle with both hands,
C
press it firmly against the front of the
door and slide the handle to the left.
Screws
mounted
on door
Installation Instructions
Keyhole slots
on back of
handle
(cont.)
LEVEL THE REFRIGERATOR
7
The leveling legs have 3 purposes:
1) Leveling legs adjust so the door closes
easily when opened about halfway.
(Front of the refrigerator should be
1/4" [6 mm] higher than the rear of
the refrigerator).
2) Leveling legs adjust so the refrigerator
is firmly positioned on the floor and
does not wobble.
3) Leveling legs serve as a stabilizing
brake to hold the refrigerator securely
in position during operation and
cleaning.
A Turn the leveling legs clockwise to raise the
refrigerator, counterclockwise to lower it.
CAUTION:
personal injury or property damage, the
leveling feet must be firmly touching
the floor.
B Install the base grille by aligning the
prongs on the back of the grille with the
holes in the cabinet. Push forward until
the grille snaps into place.
20
To avoid possible