Terra ORF302 Manual

Optical receivers ORF302, ORF302H, ORF302T
Product description
The optical receivers are intended to convert optical signals into electrical RF signals.
The receivers are dedicated to operate with suitable TERRA wideband SAT IF transmitting system. See manuals of
appropriate devices in www.terraelectronics.com.
The products are intended for indoor usage only.
Safety instructions
Installation of the receiver must be done according IEC60728-11 and national safety standards.
The receiver is powered from low DC voltage, which is not dangerous to life.
Any repairs must be done by a skilled personnel.
To ensure safe operation of the receiver follow these instructions:
Do not connect supply voltage until all cables have been connected correctly.
The receiver shall not be exposed to dripping or splashing water.
Avoid placing the receiver next to central heating components and in areas of high humidity.
If the receiver has been kept in cold conditions for a long time, keep it in a warm room no less than 2 hours before powering.
The ventilation should not be impeded by covering receiver with items, such as newspapers, table-cloths, curtains.
Avoid looking directly into beam, laser light can cause eye injuries and result in permanent loss of vision.
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled
or discarded according to applicable local and national regulations.
Equipment intended for indoor usage only.
Functional grounding. Connect to the main potential equalization.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN IEC62368-1
and RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: "Electromagnetic compatibility of technical
equipment" CU TR 020/2011, "On safety of low-voltage equipment" CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065: 2012 and EMC standards of Australia.
Vers. 1.01
1
EN
Manual in .pdf