H3C SR6600 Configuration Manual page 19

mask of the source IP address is 0.0.0.255 (by setting the node h3cAcfpRuleSrcIPMask), and the other
parameters adopt the default values.
Configure the ACFP rule through MIB browser to send information to Router, where the client index is 1,
policy index is 2, the action is deny (by setting the node h3cAcfpRuleAction), the packets whose source
IP address is 192.168.1.2 are matched (by setting the node h3cAcfpRuleSrcMAC), the wildcard mask
of the source IP address mask is 0.0.0.255 (by setting the node h3cAcfpRuleSrcIPMask), and the other
parameters adopt the default values.
Verifying the configuration
Use the ping command to verify the connectivity between Host A and Host C, Host B and Host C. The
test results show that Host C can be pinged on Host A and Host C cannot be pinged on Host B.
2-13