Download Print this page

OAK SIESTA Assembly Instructions page 2

Sofa bed

Advertisement

Please check these parts are included.
IMPORTANT - Your sofa's arms are zipped inside the base.
A
B
C
DOUBLE ENDED
BOLT
WASHER
BOLT
x4
x4
x8
PLEASE NOTE:
The fabric on this sofa has been treated with
fl ame retardant, and should only be cleaned with
specialist upholstery products.
CLEAN REGULARLY:
Remove dust by pre-brushing with a soft brush.
Gently vacuum all areas.
SUNLIGHT AND HEAT:
• Direct sunlight or heat can fade fabrics and
cause them to deteriorate. Avoid this by
placing your furniture away from prolonged
direct sunlight, or draw curtains and blinds
when necessary.
• Avoid placing furniture too close to fi res or
radiators.
• Change the position of furniture so the same
part is not always exposed to sun or heat.
1
Place the sofa on its back on a clean surface.
2 OF 4
2 Person Assembly
D
E
F
NUT
ALLEN KEY
SPANNER
x4
x1
x1
SAFETY WARNINGS:
Entrapment warning: Keep hands clear when
adjusting the ratchet to avoid trapping fi ngers.
Do not allow children to adjust the ratchet.
• Don't let children jump on the sofa bed.
• Don't let pets climb on the sofa bed.
Upholstery may be damaged by claws, and
they may carry dirt
onto the fabric.
• Avoid snagging the fabric with sharp objects
like buckles, toys or jewellery.
• Don't rest hot cups or mugs on the sofa bed,
as it could mark the fabric.
SIESTA SOFA BED
2
Screw the double ended bolts (A) into the upper
holes in each arm of the sofa until the thread
disappears into the fabric.
3
Slot the arms into place and
screw the bolts (B) in to the
bottom holes on the arm
using the Allen Key (E).
Add the washer (C) and nut
(D) to the double ended bolts
using the spanner (F).
A
A
4
Carefully slide the 'pull out' section under the sofa lifting it over the stops.
3 OF 4
A
C
C
B
B
C
D
C
D
C
B

Advertisement

loading