Panasonic AW-RP605 Operating Instructions Manual page 9

Parts and their functions
$ Control panel
OPERATE
ON
OFF
INCOM
LEVEL
IRIS
AUTO
MANU
LOCK
X
X ZOOM lever, FOCUS/IRIS dial
These are used to adjust the lens zoom in the pan-tilt
head system currently selected.
Depending on the direction in which the ZOOM lever is
tilted, TELE (telephoto) or WIDE (wide angle) is set, and
depending on the angle at which it is tilted, the zoom
speed is adjusted.
The lens focus or lens iris is adjusted using the dial at the
top of the lever.
Using the button on the top of the lever, the dial's function
can be switched so that the dial will serve as a focus
adjustment dial or iris adjustment dial.
When the focus adjustment dial function has been
selected, the FOCUS lamp on the right of the lever
comes on; alternatively, when the iris adjustment dial
function has been selected, the IRIS lamp comes on.
<Note>
When the ZOOM lever dial functions as an iris
adjustment dial, the PAN/TILT lever dial on the other side
functions as a focus adjustment dial, and the FOCUS
lamp on the left of the PAN/TILT lever comes on.
Similarly, when the ZOOM lever dial functions as a focus
adjustment dial, the PAN/TILT lever dial on the other side
functions as an iris adjustment dial, and the IRIS lamp on
the left of the PAN/TILT lever comes on.
Y IRIS lamp
This comes on when the dial on the top of the ZOOM
lever functions as an iris adjustment dial.
Z FOCUS lamp
This comes on when the dial on the top of the ZOOM
lever functions as a focus adjustment dial.
IRIS ZOOM FOCUS
OPEN TELE FAR WHITE
AWC
GAIN BAL
AUTO
A
MANU
MODE
BAR NG
B
CAM OK
ABC
DATA SET
ATW
CALL
1 2 3
TR/PSET M.LOCK
CLOSE WIDE NEAR
TR
PSET
TELE 11 12 13
MEMORY
EMPTY
21 22 23
IRIS
FOCUS
31 32 33
41 42 43
CLOSE OPEN
NEAR WIDE FAR
ZOOM/FOCUS/IRIS
LIMIT
ON
Y Z
CAMERA CONTROL
LAMP DEF
LCD
CONTRAST
START
R/B
POINT
CAMERA MENU OK
GAIN/PED
CONTROL
TRACING/PRESET MEMORY
4 5 6 7 8 9 10
PRIORITY
14 15 16 17 18 19 20
SPEED
LOW
FULL
HIGH
24 25 26 27 28 29 130
IRIS
FOCUS
L
34 35 36 37 38 39 40
44 45 46 47 48 49 50
CLOSE
NEAR
LIMIT
OFF
]\
[ PAN/TILT lever, FOCUS/IRIS dial
These are used to adjust the direction of the pan-tilt head
in the pan-tilt head system currently selected.
When the PAN/TILT lever is panned in the L/R direction,
the pan-tilt head direction changes to the left or right;
when it is tilted in the UP/DOWN direction, it changes in
the up or down direction.
The speed is adjusted by the angle to which the lever is
tilted.
The lens focus or lens iris is adjusted using the dial at the
top of the lever.
Using the button on the top surface of the lever, the dial's
function can be switched so that the dial will serve as a
focus adjustment dial or iris adjustment dial.
When the focus adjustment dial function has been
selected, the FOCUS lamp on the left of the lever comes
on; alternatively, when the iris adjustment dial function
has been selected, the IRIS lamp comes on.
<Note>
When the PAN/TILT lever dial functions as an iris
adjustment dial, the ZOOM lever dial on the other side
functions as a focus adjustment dial, and the FOCUS
lamp on the right of the ZOOM lever comes on.
Similarly, when the PAN/TILT lever dial functions as a
focus adjustment dial, the ZOOM lever dial on the other
side functions as an iris adjustment dial, and the IRIS
lamp on the right of the ZOOM lever comes on.
\ IRIS lamp
This comes on when the dial on the top of the PAN/TILT
lever functions as an iris adjustment dial.
] FOCUS lamp
This comes on when the dial on the top of the PAN/TILT
lever functions as a focus adjustment dial.
9
PAN/TILT SET
WIP H/F EXT ND OPTION
TRACING MEMORY
START/STOP RESTORE RESET
TALLY
1 2 3 4 5 AUX
CONTROL/PREVIEW MONITOR OUT SEL
UP
[
R
OPEN
DOWN FAR
PAN/TILT/FOCUS/IRIS