Skyshot Mode - Panasonic WORKIO DP-8035 Operating Instructions Manual

Making Copies
Other Features
■ ■ ■ ■ ■ Skyshot Mode
Skyshot allows copying a manuscript without
generating dark borders even if the Platen Cover or
ADF is opened. Two types of Skyshot modes can be
selected:
1)Digital Skyshot Mode : The scanning area (size)
is not pre-determined.
2)Manual Skyshot Mode : The scanning area (size)
is pre-registered into memory (M1 and M2).
● An incorrect exposure may occur when there is a
black line at the edge of the original or an image
which the copier interprets as a black pattern in
the skyshot mode.
● Other jobs requiring memory cannot be performed, while M1 and M2 buttons are being used for
NOTE
the Skyshot mode.
● An incorrect position detection of the original may occur when a strong light shines onto the
glass during skyshot mode.
62
Digital Skyshot Mode
The Digital Skyshot has 2 modes.
The default setting of 06 Digital Skyshot Mode is "Freeshp".
Before using this mode, select each setting by
using the Function setting. (See page 73)
No : A copy is made without Digital
Skyshot.
Freeshp (Free shape) : A copy is made of the original,
even if it is of irregular shape, with
Digital Skyshot.
Parallel : A copy is made straightened if the
original is placed at an angle, with
Digital Skyshot. (within 5 degrees)
Manual Skyshot Mode
● Set 07 Manual Skyshot Mode in Copier Settings first.
(See page 73)