Table of Contents
Advertisement
Installation
Creating an Enclosure
Printing and Customizing the Enclosure
The Sketchup (.skp) files can be edited using
format using the Sketchup STL Import/Export extension. Finally, these exported STL format files can be
opened and 3d-printed using netfabb.
Securing the Enclosure
The Lid Enclosure can be secured to the RoboRIO by two #4-40 1/2? screws. This will secure not only
the Lid, but will also secure the navX2-MXP circuit board.
Note that when using the Lid Enclosure, the required screw length is typically longer than the default
screws which are included with navX2-MXP.
Sketchup
Make. Then, the files can be exported to a STL
28
Advertisement
Table of Contents
