spok GenA 1 Quick Start Manual

QUICK START GUIDE
Spok® GenA Pager
TM
Versions 1 and 2
TURNING PAGER ON
Press the ENTER button for 3 seconds to turn the pager on. A startup
screen is momentarily displayed, and the pager alerts with the currently
selected alert-mode (vibrate, audio, silent).
IMPORTANT: The pager has an internal power reservoir. If the reservoir is
depleted when a new battery is inserted, it may take up to 15 seconds
before the pager can turn on.
MAIN SCREEN
As you navigate through the Main Screen, the highlighted icon will change
to indicate the current location of the cursor
Press LEFT or RIGHT to navigate through the Main Screen
Press to ENTER to select the highlighted icon
SETTINGS MENU
As you navigate through the Settings menu, the row highlighted will
indicate the current position of the cursor
Press UP or DOWN to navigate through the menu list
Press ENTER to select the current function
Press ESCAPE to exit the Settings menu
TURNING PAGER OFF
From the Settings menu:
Press DOWN to move cursor to show Turn Off Pager (v1) or Pager Off (v2)
Press the ENTER and select Turn Off from the popup and press ENTER
RECEIVING/READING MESSAGES
From the Inbox or a Groups folder:
Press DOWN to move the highlight to the message you want to read
Press ENTER to read the message
Press RIGHT or LEFT to move down or up the message list page by page
DELETING A MESSAGE/ALL MESSAGES
To delete a single message:
Press UP or DOWN to select the message you want to delete
Press ENTER for 1 second and move the highlight to show Delete
Press ENTER to delete the message
o delete all read messages (v1 &
T
Message List screen):
Press ENTER for 1 second, then press UP to move the highlight to show
either Delete All (v1) or Delete Read Msgs or Delete All Msgs (v2)
Press ENTER to delete the messages
MOVING A MESSAGE TO THE SAVED FOLDER
Press UP or DOWN to select the message you want to move
Press ENTER for 2 seconds and move the cursor to show Save
Press ENTER to save the message
LOCKING AND UNLOCKING MESSAGES
Messages can be locked to prevent them from being accidently deleted or
from being automatically replaced when the memory is full
Press UP or DOWN to select the message you want to lock or unlock
Press ENTER for 2 seconds and move the cursor to show Lock or Unlock
Press ENTER to lock or unlock the message
v2) or all messages (v2 only) (from the
SETTING MESSAGE ZOOM (v1) or MESSAGE FONT SIZE (v2) (Text size)
From the Settings menu:
Move to the Message Zoom (v1) or Message Font Size (v2) option
Press ENTER to display the Message Text Size selection popup
Press UP or DOWN to select the text size desired and press ENTER
SETTING DATE AND TIME
Press DOWN to the Set Date & Time option and press ENTER
Press ENTER to select the Set Date & Time option
Press UP or DOWN to change the hours' time value
Press LEFT or RIGHT to move to the other settings
Press ENTER to activate and exit to the main screen
SETTING INBOX ALERT (v1)
From the Settings Menu:
Press DOWN to move to the Inbox Alert option and press ENTER
Press ENTER to select the Type option
Press UP or DOWN to select the preferred alert type and press ENTER
SETTING GROUPS FOLDER ALERT (v1)
From the Groups folder:
Press UP or DOWN to move to the folder to be set
Press ENTER for 2 seconds
Press UP or DOWN to select the preferred alert type and press ENTER
SETTING INBOX OR GROUPS FOLDER ALERTS (v2)
From the Settings Menu:
Press DOWN to move to the Folder Alerts option and press ENTER
Press ENTER to select the Inbox option or DOWN & ENTER to select a
specific Groups folder (if available)
Press DOWN to move to the Type, Front Light, Reminder Alert or
Continuous Alert options and press ENTER to select
Change the option setting(s) as needed
QUIET MODE
When Quiet Mode is on, all audible device alerts are changed to vibrate.
When set to Off, all audible alerts are restored.
From the Settings menu:
Move the cursor to show Quiet Mode and press ENTER
Press UP or DOWN to change the setting to On or Off
SETTING THE ALARM
From the Settings menu:
Move the cursor to show Set Alarm (v1) or Alarm (v2) and press ENTER
Press ENTER to select the Type screen
Press UP or DOWN to select the Alarm type (Off, One Time, Daily) and
press ENTER
Press DOWN to select the Set Time screen
Press UP or DOWN to change the hours' time value
Press RIGHT to move to the minutes' value and change it
Press ENTER to activate and exit to the main screen
An alarm status icon will appear on the bottom row of the main screen
SETTING DISPLAY LOCK (Feature only available with message encryption)
From the Settings menu:
Move the cursor to show Enable Lock Code
Press ENTER to display the Enable Lock Code screen
Press a four-button sequence and remember it
Press ENTER to activate the lock
* Display lock will activate after 5 minutes of pager inactivity. For immediate
activation select Lock Now from the Settings menu
* Select Disable Lock Code from the Settings menu and enter the current passcode
to disable the display lock