Speed Selection - Black & Decker Bxfp51006Gb Manual

ENGLISH (Original instructions)
Turning the Unit On or Off
♦
To turn the unit on, begin by plugging it into the
mains. There will be a sound prompt to indicate
the fan is in stand-by mode.
♦
Press the On/Off key to turn the unit on. There will
be a sound prompt to indicate the unit has been
turned on, and the fan will automatically begin to
operate at the last speed setting used.
♦
Press the On/Off button again while the unit is
in operation to turn it off. There will be a sound
prompt to indicate the unit has been turned off.
Note! When the unit is turned off, the blades will
continue to turn for a few seconds before stopping
completely.
8

Speed Selection

♦
This unit is equipped with a choice of 6 speed
settings.
♦
Repeatedly press the Speed button to cycle
through the settings.
Timer
♦
This unit is equipped with a built-in timer, which
allows for pre-set cooling cycles of up to 12 hours.
♦
Repeatedly press the Timer button to until the
required time is displayed. Note! The timer will
change in increments of 30 minutes from 0.0 to
10 hours, and in increments of 1 hour from 10 to
12 hours.
♦
Once a time has been set, the fan will operate on
the selected settings for the set amount of time,
then shut itself off automatically once it expires.
The corresponding icon will illuminate to show that
a Timer has been set.