Installing The Battery - Black & Decker Bxft50005Gb Quick Start Manual

Features
Remote Control Receiver
1.
Air Outlet
2.
Front Cover
3.
Base
4.
Filter Cover
5.
Filter
6.
Remote Control Holder and Carry Handle
7.
Power Switch
8.
Control Panel
Low Heat (Display)
9.
Heat Setting (Touch Control)
10.
High Heat (Display)
11.
LED (Display)
12.
Oscillation (Touch Control)
13.
Oscillation (Display)
14.
Temperature (Touch Control)
15.
High Cool Fan Speed (Display)
16.
Fan Speed (Touch Control)
17.
Low Cool Fan Speed (Display)
18.
Power (Touch Control)
19.
Power (Display)
20.
Timer (Touch Control)
21.
Remote Control
Power
22.
Oscillation
23.
Timer Increase/ Decrease
24.
Temperature Increase/ Decrease
25.
Heat Setting
26.
Cool Fan Speed
27.
Use
About the Controls
♦
12 Hour timer
♦
2 Heat Setting
♦
2 Fan Setting
♦
Adjustable Thermostat
♦
Oscillation Function
(Original instructions)

Installing the Battery

WARNING: Danger of explosion if battery is
incorrectly replaced.
WARNING: DO NOT INGEST BATTERY;
CHEMICAL BURN HAZARD. This product contains
a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
♦
Keep new and used batteries away from children.
If the battery compartment does not close
securely, stop using the product and keep it away
from children.
♦
If you think batteries might have been swallowed
or placed inside any part of the body, seek
immediate medical attention.
♦
If the coin cell battery contents come into contact
with the skin, immediately wash area with mild
soap and water. If coin cell battery liquid gets
into the eye, rinse water over the open eye for
15 minutes or until irritation ceases. If medical
attention is needed, the battery electrolyte is
composed of an organic solvent and lithium salts.
♦
Do not incinerate or dispose of tool together with
household waste material! Tool that has reached
the end of its life must be collected separately
and returned to an environmentally compatible
recycling facility.
To Begin Using Your Tower Heater
♦
Start by installing the battery.
♦
To install the battery, first detach the battery cover
from the remote. To do this, place a thumb or
small object on the grooved area on the underside
of the battery cover and push it gently to the side,
while simultaneously pulling the compartment
away from the body of the remote.
♦
Insert 1 x CR2032 battery into the battery
compartment, taking care to ensure the positive
polarity is facing upwards.
♦
Once the battery is in place, slide the battery
cover back into the remote. It will automatically
lock into place and secure the battery inside.
ENGLISH
7