Writing to CD/DVD
How to change the bootable disc image using B's Recorder
Run B's Recorder, and click [View]
Select the required bootable disc image from [Floppy Disk Image Management], and click
The bootable disc image is saved in the folder "c:\Program Files\B's Recorder GOLD9".
About the bootable disc image
The following six types of bootable disc images can be used with the B's Recorder preinstalled in this computer.
Image that can be booted from this computer
Image that can be booted from this computer or a drive connected with
Parallel ATA interface
Image that can be booted from a drive connected with Parallel ATA inter-
face (Not available on this computer)
The program to restore the backup data by using the B's Recorder "HDD Backup" function.
Bootable disc images BSDOS1.BIN and BSDOS2.BIN are specially designed for this computer.
In the default setting, images BSDOS1.BIN and BSDOS2.BIN are selected.
If you boot the system using a disc created using bootable disc image BSDOS3.BIN or BSDOS4.BIN, one of the fol-
lowing error messages may be displayed, but this is not a malfunction.
• CD-ROM Drive is not ready, aborting installation.
• Not found CDROM !!
• Check CD-ROM power and IDE cable.
• CD-ROM drive is not available.
If you want to share a bootable disc with CF-52A/B/C/D series and CF-74C/D/E/F/G/H series, select bootable disc
image BSDOS3.BIN or BSDOS4.BIN.
[Disc Capacity Display Settings]
B's restore program