Hardware Diagnostics
3
Press
.
F9
At the confirmation message, select [Yes] and press Enter.
4
Press
.
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
5
While [Panasonic] boot screen is displayed, press and hold
appears at the bottom of the display.
When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware compo-
nents.
If the password is requested, enter the password.
The touch pad and the internal keyboard may not be used when each hardware checking is
running. While checking, blue and yellow colors are displayed on the left side of the hardware
icon (A).
By clicking the icon, you can execute the following operations:
•
: Start the diagnostic check from the beginning
•
: Stop the diagnostic check (You cannot restart the check partway through by clicking
: Display help (click the screen or press Space to return to the original diagnostic check screen)
•
You can check the status of the diagnostic check by the display color on the left side of the hardware icon (A).
• Aqua: Not running diagnostic check
• Alternating blue and yellow: Currently running diagnostic check. The interval of the alternating colors differs
depending on the type of diagnostic check currently running.
During memory diagnostic check, the display may freeze for a long period of time. Wait until the process is
complete.
• Green: No problems discovered
• Red: Problems discovered
84
+
until "Please Wait"
Ctrl
F7
A
)