Setting up the Scanner
Setting and removing the feed tray
Before using the scanner, follow the steps below to set the feed tray.
Adjust the document guides to the
width of A5 paper (
feed tray into the scanner (
shown in the illustration.
Push the right (
sides of the feed tray in that order until
the feed tray locks in place.
When removing the feed tray, lift it up
to unlock, and then pull the left (
and right (
scanner in that order.
Pull out the feed tray extension in the
direction of the arrow shown in the
), and insert the
) and left (
) sides out of the