15 ELECTRICAL SYSTEM
15.3
110
V01780-10
Charging the 12-V battery
Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Even if there is no load on the 12-V battery, it discharges each day.
The charging level and the method of charging are very important for the service life of the 12-V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the 12-V battery is depleted by repeated starting, the 12-V battery must be charged immediately.
If the 12-V battery is left in a discharged state for an extended period, it will become deeply discharged
and suffer a loss of capacity, destroying the battery.
–
Connect the positive cable to the 12-V battery.
Guideline
Screw, battery termi-
nal
Info
A
Contact disk
must be mounted under screw
8
cable lug
with the claws toward the battery termi-
nal.
–
Slide positive terminal cover
–
bk
Connect negative cable
Guideline
Screw, battery termi-
nal
Info
A
Contact disk
must be mounted under screw
8
cable lug
with the claws toward the battery termi-
nal.
Finishing work
–
Mount the seat. (
p. 71)
Preparatory work
–
Remove the seat. (
p. 70)
–
Remove the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
9
over the positive terminal.
to the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
(
p. 108)
7
and
7
and