Wireless Lan Usage Precautions; Radio Wave Usage Precautions - Fujitsu UTY-TFSXH3 Setting Manual

Wireless lan adapter for air conditioner
Hide thumbs Also See for UTY-TFSXH3:
Table of Contents



When you use a wireless LAN, there are precautions that you must follow in relation to
radio waves, personal information, and so on. To use this product correctly, be sure to
read the following precautions and the operation manual of the wireless LAN equipment
you are using.
We will assume no responsibility, unless legal liability is recognized, in regards to failures,
other defects, and damages incurred by use of this product that occurs through incorrect
use or during use by yourself or a third party.

3.1. Radio Wave Usage Precautions

Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other an-
tenna or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncon-
trolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be
installed and operated keeping the radiator at least 20 cm or more away from a person's
body. (UTY-TFSXH3 [AP-WH3E]/UTY-TFSXH4 [AP-WH4E] model conforms to IC (Indus-
try Canada) standard.)
This device complies with Part 15 of FCC Rules and Industry Canada license-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause unde-
sired operation of this device.
(UTY-TFSXH3 [AP-WH3E]/UTY-TFSXH4 [AP-WH4E] model conforms to IC (Industry
Canada) standard.)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
Do not use this product in the following locations. Using this product in such locations
may cause communications to become unstable or not possible.
Near wireless communication equipment that uses the same frequency band (2.4
GHz) as this product.
In places where there are magnetic fields from equipment such as microwave ovens
or static electricity or radio wave interference occurs.
(Radio waves may not reach depending on the environment.)


Table of Contents

Subscribe to Our Youtube Channel

This manual is also suitable for:


Table of Contents