Dehumidifying Mode (Dry); Fan Mode (Fan) - Saunier Duval SDHL-1 025 NW User Manual

7.5.3

Dehumidifying Mode (DRY)

In dehumidifying mode (DRY), the Air to Air heat pump unit
operates by reducing the humidity from the atmosphere.
3
Fig. 7.8 Dehumidifying mode selection.
Legend
1 MODE button
2 DRY mode indicator
3 TEMP / TIME buttons
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.9 Operation modes.
• Select the dehumidifying mode (DRY).
• Press the - / + buttons to select the temperature setting.
When pressing the - / + buttons, the temperature configuration
will increase or decrease by 1ºC.
SDH17-NW-U_EN - 05/14 - Saunier Duval
When the fan is set to DRY mode, the air conditioner selects
the low fan speed to make the most effective mode.
NOTE:
i
In dehumidifying mode, prolonged use of the unit under
conditions of considerable air humidity can cause drops
of water to fall on the outlet louvres.
7.5.4
In fan mode (FAN) the SLEEP function is disabled.
1
2
Fig. 7.10
Legend
1 MODE button
2 FAN mode indicator
3 FAN button
In order to activate the fan mode (FAN):
With the unit switched on (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.11
OPERATING INSTRUCTIONS

Fan mode (FAN)

3
2
Fan selection mode.
Operation modes.
1
EN
- 13 -