Changing The Handset Name - Panasonic KX-TG6592T Operating Instructions Manual

Programming

Changing the handset name

Each handset can be given a
customized name ("Bob", "Kitchen",
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is "No". If you
select "Yes" without entering any
handset name, "Handset 1" to
"Handset 6" is displayed.
1
MMENUN#104
2
Enter the desired name (max. 10
characters; see the character table,
page 19).
R If not required, go to step 3.
3
MSAVEN
4
MbN: Select the desired setting. a
MSELECTN 2 times
5
MOFFN
Call block (Caller ID
subscribers only)
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted ("Storing unwanted callers",
page 30).
– the unit receives a call without phone
number ("Blocking incoming calls
without phone number", page 30).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list, the unit
sends out a busy tone to the caller, and
then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
phone number, the call is logged in
30
For assistance, please visit http://www.panasonic.com/help
the caller list (page 33) with
the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers
in the call block list.
Important:
R We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
n From the caller list:
1
MFN CID
2
MbN: Select the entry to be
blocked.
R To edit the number, press
MEDITN repeatedly until the
phone number is shown in the
10-digit format.
3
MSAVEN
4
MbN: "Call block" a
MSELECTN
5
MbN: "Yes" a MSELECTN
6
Edit the phone number if
necessary (24 digits max.).
7
MSAVEN a MOFFN
n By entering phone numbers:
1
MMENUN#217 a MADDN
2
Enter the phone number (24
digits max.).
R To erase a digit, press
MCLEARN.
3
MSAVEN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone
number is provided, such as a call just
showing "Out of area".
1
MMENUN#240
after