Programmable Settings
Base unit ringer tone
Base Unit
Make sure the base unit is not being used.
1
Select either line by pressing [LINE SELECT]
until "LINE 1" or "LINE 2" is announced.
• The selected line (
• Do not select both lines. You cannot set the
ringer for both lines at the same time.
2
<
Press [
] or [
• Each time you press [<] or [>]
selected.
• If the ringer volume has been turned off, the base unit will not ring. Press [d]
or [B] to turn the ringer on.
• To stop ringing, press [STOP].
• You can also select the ringer tone by pressing [1] to [8].
[1] to [4]: Bell ringer patterns
[5] to [8]: Melody patterns
• To change the ringer volume, press [B] or [d] (p. 24, step 2).
Selecting the base unit ringer tone by using the
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [B], then press the
soft key (
SELECT
3
Scroll to "Set base unit" by pressing [d] or [B], then press the
soft key (
SELECT
4
Scroll to "Ringer tone" by pressing [B] or [d], then press the soft
key (
).
SELECT
5
Follow steps 4 to 7 of "Handset ringer tone" on page 25.
• When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been turned off (p. 24), the base unit will not ring.
26
(use either the base unit or the handset)
or
) is displayed.
LINE 1
LINE 2
>
] repeatedly to select the desired tone.
,
another ringer tone will be heard and
).
).
Ex. LINE 2 selected.
1
2
LINE
LINE
Handset