Advertisement
Quick Links
This document is a text description of the control panel
layout for the product listed below.
"PDF" files of the complete operating instructions are
available
from
the
Customer
Support
section
of
www.Panasonic.com.
If you need the operating instructions in an alternate
format, please request it from Customer Support.
Model Number KX-TG2451B or KX-TG2451S
2.4GHz Cordless Phone
Handset
With the handset facing you, the antenna is at the top right. Below the earpiece is the display. Below the
display, in the center of the handset is the NAVIGATOR, a large cross key consisting of UP and DOWN
TRIANGLES on the vertical row, and RIGHT and LEFT TRIANGLES on the horizontal row. To the
upper left of the NAVIGATOR key is the TALK button. To the upper right is the DIRECT button. To the
lower left is the CHANNEL button. The CHANNEL button is also the FUNCTION or EXIT button. To
the lower right of the NAVIGATOR key is the CLEAR button.
Below these buttons is the telephone keypad laid out in the conventional arrangement. Below the keypad
on the left is the FLASH button. The FLASH button is also the CALL WAIT or VOICE MAIL button.
Below the keypad on the right is the REDIAL button. The REDIAL button is also the PAUSE button.
At the very bottom of the handset are the charge contacts.
The headset jack is on the left side of the handset, with a rubber cover.
Base unit
With the base unit facing you, the antenna should be straight up on the right side, toward the back of the
unit. The left part of the unit is a cradle for charging the handset. In the front right of the unit is a large
triangular depression with a large button with three nibs. This button is the HANDSET LOCATOR. On
the top of the depression is the HANDSET IN USE or CHARGE indicator. Above this indicator is the
CALLER ID indicator.
Advertisement
