Panasonic KX-TG2343W Operating Instructions Manual page 60

Troubleshooting
General
Problem
The handset and/or base unit
does not work.
"Recharge battery" is
displayed, "7" flashes, or
the handset beeps
intermittently.
"Charge for 6h" and "8"
are displayed and the handset
does not work.
You charged the battery fully,
but "Recharge battery" is
still displayed and/or "7"
continues to flash, or "Charge
for 6h" and "8" are
displayed.
The CHARGE indicator does
not go out after the battery has
been charged.
If you cannot solve your
problem
60
Cause & Remedy
• Check the settings (p. 9–11).
• Check whether the dialing mode setting is
correct (p. 15).
• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again
(p. 11).
• Check battery installation (p. 10).
• Unplug the base unit's AC adaptor to reset it.
Plug in, and try again.
• Re-install the battery (p. 10) and fully charge
it.
• Fully charge the battery (p. 10).
• The battery has been discharged. Fully
charge the battery (p. 10).
• Check battery installation (p. 10).
• Clean the charge contacts and charge again
(p. 11).
• The battery may need to be replaced. If you
install a new battery, fully charge it (p. 10).
• This is normal.
• Visit our website:
http://www.panasonic.com/support
• Contact us via the web at:
http://www.panasonic.com/contactinfo
• Call our customer call center at:
1-800-211-PANA(7262)