Aspect Controls - Panasonic Viera TH-32LHD7 Operating Instructions Manual

ASPECT Controls

The LCD Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT
[from the unit]
+
INPUT MENU -/ VOL / ENTER/
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture
• Others
Notes:
• For PC signal input, the mode switches between "NORMAL", "ZOOM" and "FULL" only.
• For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
"COMPONENT","RGB" and "DVI" input signal, the mode is set to "FULL" mode, and switching is not possible.
• Panasonic AUTO can be selected only during Video signal input.
• The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2 and PC IN).
Mode
4
NORMAL
NORMAL
4
ZOOM
4
FULL
4
JUST
4
For an elongated image
Panasonic
AUTO
4
For a 4:3 image
18
Press repeatedly to move through the aspect options:
NORMAL
Panasonic AUTO
The aspect mode changes each time the ENTER button
is pressed.
NORMAL
:
: Aspect switching is not possible.
Picture
3
16
ZOOM
3 9
16
FULL
3 9
16
JUST
3 9
16
Panasonic AUTO
3 9
Image is expanded
Changes in
accordance with the
Panasonic AUTO
3
mode setting (see
page 29).
ZOOM FULL
JUST
FULL
NORMAL will display a 4:3 picture at its standard 4:3 size.
ZOOM mode magnifi es the central section of the picture.
FULL will display the picture at its maximum size but with slight
elongation.
JUST mode will display a 4:3 picture at its maximum size but
with aspect correction applied to the center of the screen so that
elongation is only apparent at the left and right edges of the screen.
The size of the picture will depend on the original signal.
The display will automatically become enlarged (depending on the
picture source), allowing you to view the picture at its maximum size.
Notes:
• Panasonic AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program material.
Certain 4:3 program material, such as stock market data screens,
may occasionally cause the image size to change unexpectedly.
When viewing such programs, it is recommended that the ASPECT
be set to NORMAL.
• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with
FULL mode, the adjustment is not memorized. When exiting the
mode, the screen will return to a former adjustment.
N
PICTURE
MULTI
PIP
PICTURE
POS. /SIZE
Explanation
INPUT
SURROUND
VOL
R
SOUND SET UP
ZOOM
SWAP SELECT MOVE
ASPECT