Indicator Lights - JLA 98 Installation & Operation Manual

Figure 28

Indicator Lights

Coin
Wash
Rinse
Spin
Door Locked
Start
IMPORTANT: If washer fails to operate properly after
installation, make sure electrical service and water
supply faucets are turned on. Are all the controls prop-
erly set? Have a qualified service person refer to the
wiring diagram (located inside of washer control cabi-
net) and check for broken, loose or incorrect wiring.
NOTE: Once a cycle has started, the door can only be
opened by first unplugging the power cord and waiting
one minute.
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
FLW2391N_SVG
On coin models, coin is lit to
prompt the user to insert coins
to satisfy the vend price. When
Coin is lit, the digits show the
vend price remaining to be sat-
isfied.
Wash is lit during the Wash
portions of the cycle.
Rinse is lit during the Rinse
portions of the cycle.
Spin is lit during the final spin
portion of the cycle.
Door Locked is lit whenever
the door is locked. The door
cannot be opened when this
light is on.
Start flashes one second on
and one second off when the
full vend price has been satis-
fied.
To reduce the risk of bodily injury, do not remove
laundry from washer until all lights are out, and all
moving parts have stopped.
23
WARNING
Part No. 805412R7
Operation
W092