JFE Advantech MK-750ST-E Instruction Manual page 9

●Precautions for use
MK-750ST-E is a precision instrument. Incorrect use or rough handling may cause malfunction or data
loss. Read instruction below and use properly.
・Do not continue to use with low battery.
It may cause data loss or file corruption.
・Immediately recharge when your battery pack charge level becomes low.
・Do not leave a low battery level battery pack attached to the instrument for a long
Caution
period of time.
・Use the instrument under following conditions.
・Temperature range while using: between -5 and 55℃.
・Temperature range while charging: between 0 and 40℃.
・Humidity level 85%RH or less, and no condensation.
Using out of the ranges above may cause malfunction.
・Avoid operating the instrument in the following locations.
Any of the followings may cause malfunction or damage the instrument.
・Location where water may splash or under rainy weather.
Caution
・Location where static tends to be generated.
・Location where extremely high or low in temperature.
・Location with high humidity.
・Location with rapid change in temperature.
・Location with high possibility of getting in contact with acid or alkaline.
・Do not place heavy object on the instrument.
・Do not drop the instrument or apply strong impact.
・Do not disassemble or modify the instrument.
We will not warranty the instrument even if it is still in its warranty period if
disassembled or modified.
・Do not put foreign matters into connectors or battery holder.
・When installing the instrument onto a tripod using platform attachment screws,
make sure to use those are strong enough. Also, be sure to firmly attach to the
tripod.
・Platform attachment screws are made assuming to be used with a tripod. Do not
use on a moving location.
viii