Setting Timer For Starting Or Recording 1Seg Programs - Docomo Pro Series Instruction Manual

Displaying reservation recording history
<Reserve rec hist>
Reservation recordings ended are saved. Check the recordings.
Up to 50 reservation recording histories are saved.
1
In the Custom menu, select [1Seg]/[Reserve rec
hist].
: In stand-by: When [1Seg rec hist] is displayed, press t.
: To view recorded video list screen: Press i.
1
2
5
3
Reserved recording
history list
3 Icon for destination of video to record
0
FOMA terminal handset
4 Recording start date and time
5 Program name
2
Select a reservation recording history/t.
: To view recorded video list screen: Press i.
The following information is shown in the reserved recording history
details screen.
Recording results
Remote control no.
Submenu operations for reserved recording history list
■
screen
[Delete one]/[Yes]
[Delete selected]/select a reservation recording
C/[Yes]
[Delete all]/enter the terminal security code/t/[Yes]
242
1 Number of entries/total entries
4
2 Icon indicating the recordings
v
Complete
w
Failed
!
microSD
Destination Start time
Broadcaster name Program name
history/t/
Submenu operations for reserved recording history
■
details screen
[Delete one]/[Yes]
Using data broadcasting
Use data broadcasting as well as video, voice and sound for
1Seg. In data broadcasting, use a variety of information including
still pictures and moving pictures. For example, connect sites
available in programs, submit your opinion, etc.
1
In the 1Seg watching screen, press C/[Switch].
: Alternatively, press m to switch the operation.
: Data broadcasting mode is set (Each time this key is pressed, the
mode switches between video mode and data broadcasting mode).
: For details on operation in data broadcasting mode nP. 231
2
Select an item/t.
: For details on operations while a site is displayed nP. 165
A sound may be played during display of data broadcasting/data
broadcasting sites.
The data broadcasting cannot be displayed in Two screen display with
the Cycloid position.
In the Multi Window display, it is not possible to switch to data
broadcast mode (Data broadcast operation is not available).
On the data broadcast screen, select [Yes(Always)]. From the next
time, the confirmation screen is not displayed and the data for the data
End time
broadcasting/data broadcasting site may be automatically updated. In
such cases, packet transmission charges may apply.
To show the confirmation screen for data broadcasting again, perform
Reset status display (nP. 244).