Solo Stove FIRE PIT Instructions

HOW TO USE YOUR SOLO STOVE FIRE PIT
Step 1
Remove the nested flame ring and set
it aside.
Step 2
Start by placing your tinder, kindling and
small wood pieces in the center of the
fire pit.
FOR BEST RESULTS, DO NOT OVERFILL
WITH WOOD THAT COVERS OR EXTENDS
ABOVE THE TOP AIR HOLES.
Step 3
Light your fire.
STORAGE AND CARE
Caring for your fire pit correctly will prolong its look and
usability.
After each use, wait until the unit has completely cooled down
then turn the fire pit over to empty any remaining ash. If you
want to wipe it down, use only a dry cloth.
It's important to keep rain and snow out of your fire pit. Solo
Stove Shelter is a great cover option and can be purchased
separately for all fire pits. For Ranger and Bonfire, you can also
use the carrying case included with your purchase.
Must read before use.
Failure to do so can result
in serious injury or death.
Vor Gebrauch unbedingt lesen.
Andernfalls sind schwere Verletzungen
oder Todesfälle möglich. HIER SCANNEN.
À lire absolument avant toute utilisation.
Le non-respect de cette consigne peut
entraîner des blessures graves, voire
mortelles. SCANNER ICI.
Leer antes de usar. El no hacerlo puede
resultar en lesiones graves o muerte.
ESCANEE AQUÍ.
Lezen voor gebruik. Het nalaten hiervan
kan leiden tot serieuze verwondingen of
de dood. SCAN HIER.
Da leggere prima dell'uso. In caso
contrario, possono verificarsi lesioni gravi o
morte. SCANSIONA QUI.
Step 4
Place the flame ring back on top of the
fire pit with the angled edges pointing
upward.
THIS WILL PROVIDE PROTECTION FROM
THE WIND AND ENHANCE THE LOOK OF
THE FLAMES.
CORRECT INCORRECT
Due to extremely high temperatures, discoloration of the fire
pit will occur and is considered normal. Stainless steel has an
increased resistance to rust; however, it is not rust-proof.
Prolonged exposure to moisture may result in increased staining
and/or rusting. Due to extremely high temperatures inside, the
fire pit may show signs of staining/rust. This is normal and will
not affect normal use.
SOLO STOVE FIRE PITS
Instructions & Other Information
SCAN HERE
Step 5
As your ember bed gets hotter, start
adding in 1-3 pieces of wood. As those
catch, add enough wood to fill the burn
chamber.
Step 6
When you're ready to call it a night, let
the fire pit burn out on its own.
Step 7
After the fire pit has completely cooled
turn it over to empty the ash.
v1.0