Early Warning Alert System - Oregon Scientific WR103NX User Manual

Weather & emergency alert monitor
Hide thumbs Also See for WR103NX:
Table of Contents

Advertisement

To alternate between various time / date displays:
Press MODE to advance the second line through the
time, date and alarm displays.
NOTE Each press will advance the display sequentially.
Current time
Current date
To alternate between various radio-status displays:
Press NOAA button to scroll through the NOAA mode
options (on, standby, mute, or off). The NOAA mode is
displayed on the top line of the LCD.
NOAA OFF
NOAA Standby

EARLY WARNING ALERT SYSTEM

The early warning system uses radio signals to alert the
user to environmental dangers. A built-in radio receiver
will respond to 7 specified signal channels. To use the
early warning function, select 1 of 4 options to determine
the activity status of the radio receiver.
Radio-status options are:
Alarm 1
Alarm 2
NOAA ON
To select radio settings:
NOAA Mute
Press NOAA to alternate between various radio status
settings. Each press will advance the setting by 1 unit.
7
Radio ON [
]
NOAA
The radio is ON and voice messages can be heard
continuously.
Radio Standby [
]
The radio is in Standby and will switch to the ON
position when an alert signal is received.
Radio Mute [
]
The radio is in Standby and the LED will flash red to
indicate that the unit has received an alert signal.
Voice messages cannot be heard until the unit is
switched to the ON position.
Radio OFF
The radio is turned OFF and the unit will not respond
to alert signals.

Advertisement

Table of Contents
loading

Table of Contents