About Radio Channels - Oregon Scientific WR102 Instruction Manual

Example of the first ten county radio channels and SAME codes for Montana:
ST. COUNTY
MT Beaverhead
MT Big Horn
MT Blaine
MT Broadwater
MT Carbon
MT Carter
MT Cascade
MT Chouteau
MT Chouteau
MT Custer
In addition, many counties have been further subdivided into as many as 9 smaller sub-sections. The numbers
of one (1) to nine (9) in the far left column of a SAME code identifies specific sub-sections of a county. If the county
has not been subdivided, the first digit of the county code will be zero (0).

ABOUT RADIO CHANNELS

The NWR radio channels work in the same way as radio channels of a regular radio. All of the NWR transmission
stations operate on one of seven frequencies.
The WR102 labels each frequency channel "A" to "G". Once a radio frequency for a region has been selected,
the WR102 will receive audio and code information on this frequency.
The radio channel is located in the upper left hand corner of the LCD.
TO CHANGE THE RADIO CHANNEL
1. In any of the time displays, press [CHANNEL] and hold for two (2) seconds. The unit will emit a beep when
initially pressed and then again after the two seconds. The channel selection icon will begin to flash.
2. While the channel selection icon is flashing, press [UP VOLUME] or [DOWN VOLUME] to scroll through the
channel selections.
3. When the channel has been selected, press [MODE] to save selection and to return to time display mode.
SAME # NWRTRANSMITTER
030001 Butte MT
030003 Billings MT
030005 Havre MT
030007 Helena MT
030009 Billings MT
030011 —No NWR Coverage—
030013 Great Falls MT
030015 Havre MT
030015 Great Falls MT
030017 Miles City MT
Channel Corresponding Radio Frequency
A
B
C
D
E
F
G
FREQMHZ CALL
162.550 WXL79
162.550 WXL27
162.400 WXL53
162.400 WXK66
162.550 WXL27
162.550 WXJ43
162.400 WXL53
162.550 WXJ43
162.400 WXL54
162.400 MHz
162.425 MHz
162.450 MHz
162.475 MHz
162.500 MHz
162.525 MHz
162.550 MHz
WATTS REMARKS
100
400
300
300
400
300
300
300
300