Changing The Camera Angle; Using Introscan Function - Onkyo DV-S353 Instruction Manual

Using Banner Display
DVD

Changing the Camera Angle

Angle : 1 Angle : 2
If the scene was recorded from multiple angles, you can easily
change the camera angle of the scene you are watching.
1
Press On SCREEN during playback.
2 Press 2/3 until the SUBTITLE icon
is highlighted.
3
Press ENTER.
The angle menu appears.
4
Press ENTER to select the angle.
Each time you press ENTER, the angle
changes.
To turn off the angle menu
Press ON SCREEN or CLEAR.
The menu is switched off when no operation is performed for
about 3 seconds.
Using ANGLE on the remote
1 Press ANGLE on the remote during playback.
2 Press ANGLE or ENTER to select the audio language.
Notes
• You can change the camera angle during still playback. The camera
angle changes to the new setting when you resume normal playback.
• If you pause a picture immediately after changing the camera angle, the
resumed playback picture may not use the new camera angle.
Angle : 3
VCD CD

Using IntroScan function

Track : 1 Track : 2
IntroScan plays the first few seconds of each track on the Video CD
or CD similar to the scan feature that's on many car radios.
1
Press ON SCREEN during
playback.
2
Press 2/3 until the IntroScan icon
is highlighted.
3
Press ENTER.
The first 10 seconds of each track will be
played.
Press £ to stop IntroScan playback and start
playing the current track entirely.
Note
After IntroScan goes through all of the tracks, it stops.
Track : 3
23