CAME PTDC70 Quick Start Programming Instructions

PTDC70 & 50 MBPT Keypad
Quick Start Programming Instructions
!
PROGRAMMING NOTE:
until the end of the power up delay and the keypad stops beeping
1
Set the Keypad into Programming Mode with The Factory Set Master Code 0 0 0 0
AAAA AA
0 0 0 0
NOTE: If the Master Code is forgotten, use the DAP Code to set the keypad into programming mode.
(See DAP CODE 8080 in the main instructions for the details).
2
Change The Factory Set Master Code to the Owner's Private Master Code for Security Reasons
AA AAAA A
0 1 1 2 3 4
1 2 3 4 is now the new Master Code and the factory set default of 0 0 0 0 is erased.
3
Set a "User PIN" to Operate The Output 1 (relay 1) for Door Open
AA 1 0 A 2
(a) (b)
(a) 10 = Programming Location for Output 1 (relay 1)
(b) 2 = Programming for User PIN
(c) 0 0 1 = One of the 1,000 User indexes for the User PIN ranging from 000-999
(d) 4 3 2 1 = The User PIN that is programmed for the door.
(e) # = Confirm the User PIN, (listen for 2 rapid confirmation beeps after pressing #)
NOTE: A User PIN can not be the same as the Master Code
REMARK:
If more User PINs are required for output 1, repeat procedure 3 (above) with other User indexes,
such as 002, 003, 004 --- 999 etc. A total of 1,000 users are allowed (See Programming Location 10
for the details in the main instruction booklet)
4

Exit The Programming Mode

* *
AA
---- Listen for 2 rapid confirmation beeps
The programming mode is complete and the keypad is back to normal operation mode.
OPERATION
5
Open The Door with The User PIN (The door will release for the factory default time of 5 seconds)
AAAA A
4 3 2 1
REMARK:
To change the private master code or "User PIN" - simply repeat procedures 2 and 3 (above).
For all other keypad programming features and functions including door release times, please
refer to the main instruction booklet.
* * ---- Listen for the 2 rapid beeps - The keypad is now in programming mode.
---- 2 rapid beeps, (1 2 3 4 is a Master Code for example here only)
#
AAA 0 0 1
(c)
---- 1 long beep, the door is now open
#
When powering up please wait 1 minute
AAAA A 4 3 2 1
#
(d) (e)
Tel 01442 230 800
(4 3 2 1 is a User PIN for example only)
www.bpt.co.uk
.