Unfolding The Frame; Adjusting The Seat Height - SWAGTRON EB-8 User Manual

2.2 Unfolding the Frame

Unfold the rear wheel / section and hold your eBike upright with
Latch
Latch Lock
the kickstand. Push the latch closed so that it's parallel with the
bike's frame then turn the latch lock down towards the latch to
lock it in place (fig.4).
fig. 4

2.3 Adjusting the Seat Height

For better pedaling, safety, and overall comfort, positioning the seat at the right height is key.
The rider's leg length is used to determine the seat's position. During pedaling, your hips should
remain level and your legs shouldn't over-extend. To determine the right seat height, sit on the
eBike with one pedal at its lowest point and place the ball of your foot on the pedal. If your knee
bends slightly at this position, the seat is at the right height. Additionally, when placing your heel
on the pedal, your leg should be nearly straight.
Clamp
First, open the clamp under the seat post. Pull the seat up or push it down to
adjust height. Check to make sure the seat post is fully inserted into the frame
and the head of the seat is parallel with the frame. Lastly, close the clamp to
secure the seat in place (fig. 5).
fig.5
7
SWAGTRON EB-8 20" Electric Bike ENGLISH