Top Cover - HP Compaq Presario CQ71 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad and cable, and caps lock LED board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Display assembly (see
Remove the top cover:
1. Close the computer.
2. Turn the computer upside down, with the rear panel toward you.
3. Remove the four Phillips PM2.5×7.0 screws that secure the top cover to the base enclosure.
4. Turn the computer right-side up, with the front toward you.
5. Disconnect the caps lock LED board cable (1) from the system board.
72 Chapter 4 Removal and replacement procedures
Battery on page 47).
Hard drive on page 56)
Optical drive on page
Keyboard on page 60)
Keyboard cover on page
Display assembly on page 66
53)
63)
Spare part number
531852-001