Main Parts - Seco S532-9-8602-228-3 User Manual

1 DESCRIPTION
1.1 PURPOSE AND CONDITIONS OF USE
The rear hitch is intended only for MP 122 mowers (Diesel/Petrol) and after assembly enables the connection
of standard trailers with 50 mm tow balls or trailers with 16 mm hitch pins.
The maximum load bearing capacity of the trailer with load is 300 kg.
The mounted rear hitch does not interfere with the full use of the mower.
A trailer with a load can be pulled with the grass catcher left on the mower or after removing the grass catcher
from the mower.
When pulling the trailer with the grass catcher left on the mower, it is necessary to meet the following
ƒ
conditions:
- the grass catcher must be empty and raised to an appropriate position above the trailer that is being
pulled
- the maximum travelling speed is 2 km/h
- the mower may only travel on level ground
When pulling the trailer with the grass catcher removed, there are no additional conditions.
ƒ

1.2 MAIN PARTS

The rear hitch consists of the following parts:
(1) BRACKET
(2) MOUNTING NUTS
1
(3) MOUNTING BOLTS
(4) TOW BALL
(5) NUT
All the above listed parts must be mounted on the mower.
16