Advertisement
Quick Links
The KB-MV series is a color video multi-unit entry system that can be configured for buildings with two to
twelve tenant locations. Up to three video entrance stations can be used in one system. The color camera can
be tilted upward for a better view of the visitor, and the speaker/microphone provides hands free
communication at the entrance panel. Inside each tenant location, the standard Aiphone KB series audio/video
stations are employed, allowing up to five monitoring locations per tenant. If there are are less than three
common entries, an individual audio-only or audio-video door station can be included for each tenant location.
Microphone
Camera Lens
Night Vision LED
Speaker
KB-SWM and KB-SWS
with 2 GF-3P, 1 GF-2F
Features:
Streamline design, can be semi flush mounted or surface mounted
Color CCD camera with tilt control
Configure from 2 to 12 call buttons per entry, using 1-, 2-, or 3-button modular panels
Backlit call button directory for easy viewing of names at night
Weather resistant for outdoor use
Hands free communication from entry panel
Automatic night mode LED
Employs KB series room stations
Up to three video entry stations per tenant
Up to five inside stations per tenant
Selective door release from each tenant location when using RY-3DL (one per tenant)
Easy homerun wiring from entry to each tenant using Aiphone series wire # 871802
KB-MV2, KB-MV3, KB-SWM, KB-SWS
Color Tilt Multi-Unit Video Entrance System
- INSTRUCTIONS -
KB-MV2
KB-MV3
Open position
for additional
module,
determined by
panel design.
Page 1
Advertisement
Related Manuals for Aiphone KB-MV2
Summary of Contents for Aiphone KB-MV2
- Page 1 Inside each tenant location, the standard Aiphone KB series audio/video stations are employed, allowing up to five monitoring locations per tenant. If there are are less than three common entries, an individual audio-only or audio-video door station can be included for each tenant location.
- Page 2 Plug the KB-MV2 / KB-MV3 connector cable into the KB-SWM. If any KB-SWS sub-modules are used, plug the KB-MV2 / KB-MV3 connector cable into the closest one, then plug its blue and yellow 10-pin connector into the next switch module, daisy-chaining them together. Plug the last KB-SWS connector into the KB-SWM master switch module.
-
Page 3: Wiring Diagram
White Black Wiring Notes: Use Aiphone wire 871802, or 2-conductor, 18 AWG solid, non-shielded, PE insulated cable. Each entrance panel must have its own SKK-620 power supply. Each tenant must have its own KB-3MRD master and PS-2420UL power supply. Refer to KB-3MRD instructions for complete wiring, including distance limitations. -
Page 4: Specifications
This warranty shall not apply to any Aiphone product that has been subjected to misuse, neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory.