Disposal And Recycling - EINHELL GE-HC 18 Li T II Operating Instructions Manual

equipment. Ensure that no water can get into
the interior of the equipment. The ingress of
water into an electric power tool increases the
risk of an electric shock.
8.2 Maintenance
The cutters should be cleaned and lubricated
at regular intervals in order to ensure best
performance at all times. Remove deposits with
a brush and apply a thin fi lm of machine oil (Fig.
23).

9. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
Anl_GE_HC_18_Li_T_Part2_USA_SPK7.indb 15 Anl_GE_HC_18_Li_T_Part2_USA_SPK7.indb 15
EN
- 15 -
23.11.2022 14:25:53 23.11.2022 14:25:53