Performance Health DAYS OVER BED POLE Instructions

DAYS OVER BED POLE
This Overbed Pole can be used in conjunction with a conventional or hospital bed. It
is lightweight, sturdy and easy to assemble.

Parts

1. Molded composite adjustable handle on webbing strap
2. Base frame
3. Middle section
4. Top section

Specifications:


Overall height: 1680mm

Mold handle height adjustment: 1090– 1320mm

Footprint: 760mm x 850mm

Maximum User Weight: 135kg

Net weight: 13kg
Check all parts for shipping damage. In case of shipping damage, do not use. Contact dealer/carrier for further instructions

Warning


Do not install or use this equipment without first reading and understanding this
instruction sheet. If you are not able to understand warnings, cautions or instructions,
contact a healthcare professional, dealer or technical personnel before attempting to
install this equipment. Otherwise injury or damage may occur.

Days over bed pole is not designed to support total body weight of an individual. Use it
for assistance only.

Always be aware of the location of boom tube, base assemblies and handle otherwise
injury or damage may occur.

Do not install or adjust the over bed pole while bed is occupied.

After installation and before use, ensure the tube sections are fully engaged at all times.

Secure strap between stoppers at top section as shown.

After adjusting strap to suitable length, ensure strap is securely locked in place.

Always locate the over bed pole so handle is directly above the individual using the
handle. Handle should be grasped with both hands and pulled straight down. Do not pull
handle at an angle otherwise injury or damage may occur.

Help and advice


It may be advisable to consult a physiotherapist or occupational therapist before choosing and using this equipment.

Lifting poles may not be appropriate for people in certain circumstances, for example if they have poor trunk control
or painful shoulders.

If freestanding, care should be taken to ensure that the base is positioned properly under the bed, otherwise the
frame may tip over. Furthermore, ensure that there is enough clearance for the base to slide under a divan bed where
required.

If you also use a mobile hoist for transfers, ensure that the lifting pole base does not prevent the host from being
correctly positioned under the bed and that the overhead arm does not obstruct the lifting boom of the hoist.
________________________________________________________________________________________________
Manufactured for P
Unit 3, Bassalt Road
Pemulwuy NSW 2145 AUSTRALIA
Made in China
Tel: 1300 473 422
4
1
3
2
Strap stoppers