Page 1
P2-E6 Now that you have unpacked each box, you have GETTING STARTED GUIDE everything you need to start using your P2-E6. The set-up of your P2-E6 is quick and simple. Before using the P2-E6, please read and understand the entire user manual.
Page 2
Intake and exhaust with will initiate. clear access. Slide the flat side of the Connect the AC power to the P2-E6. The green battery until the latch LED on the power adapter will be on and the returns to the upper concentrator will beep.
Page 3
Change the P2-E6 to the flow setting prescribed Additional information by your physician. Press the + or - buttons to When adapter is connected/disconnected adjust to the desired setting. or battery is installed/uninstalled, device will beep and display will show status information for battery charge.
Page 4
If batteries become wet, stop use immediately and dispose of battery properly. Battery Replacement 2. Press down the latch, and slide the battery out. 2. Insert the new P2-E6 battery by sliding battery into place until the latch returns to the upper position.
Page 5
Setting Battery Life 5.4h 4.8h 3.3h 2.5h 2.1h 1.7h Store battery in a cool, dry place. Store with a charge of 40-50%. Batteries should not be left dormant for more than 90 days at a time.
Need help?
Do you have a question about the P2-E6 and is the answer not in the manual?
Questions and answers