Computer Requirements - Nortel BCM50 Documentation Update

Meet Me Conferencing User Guide
Page 9, Conference phases
Note: When you enable the QuickStart feature on a Meet Me Conferencing bridge
that extermal conference participants can access by using a 1-800 number, there is
a risk that your company can incur unauthorized toll charges. To avoid this type of
fraud, do not enable the QuickStart feature on a conference bridge that can be
accessed with a 1-800 number.
Page 20, To configure a passcode using softkeys
The following sentence is added at the end of step 3 and the PASS softkey is removed from the display:
"The passcode no longer appears as an option."
Page 27, To mute a single participant using softkeys
The following note is added at the end of step 3:
"NOTE: UNDO is available for 15 seconds after pressing MUTE. After 15 seconds, the softkey is blank and the
participant must unmute their line."
Page 31 and 33, To hear a list of available commands using softkeys
Remove step 4: "After list of available commands, returns to main menu."
Page 36, To set a passcode using your keypad
Remove step 2.: You longer need to press 1.
Multimedia Contact Center Set Up and Operation Guide
Page 21, Computer requirements
The computer you use to run CallPilot Manager must have
• Windows 2000 Professional SP4, Windows XP Professional SP2, Windows Vista Business, Windows Vista
Ultimate, or Windows Vista Enterprise (32-bit or 64-bit versions of Windows Vista).
Networking Configuration Guide
Page 115, Table 21, Routing Table fields
Changed Name field to Description to match changes in Element Manager.
Description
Also, same table, changed MCDN Protocol description:
MCDN Protocol
BCM50 3.0 Documentation Update
<alphanumeric> Enter the name of the remote system. This must be a
unique name within the routing table.
<drop down list> For non-Nortel endpoints, select None.
None, SL1, CSE For BCM50 2.5 and IPT 3.0, select SL1.
Default: None For CS1K, BCM50 3.0, and newer, select CSE.
11
NN40020-400