Download Print this page

For Your Safety; Mounting The Handset - Nokia HSU-4 Installation Manual

Nokia hsu-4 car handset: installation guide

Advertisement

For your safety

ROAD SAFETY COMES FIRST
Remember that the safety of operating a motor vehicle in traffic
requires the full attention of all motorists. Only use / operate your
handset if allowed by local laws / restrictions and traffic conditions
permit safe use.
Observe the safety and care and maintenance guidelines set out in the Nokia 610
car kit phone user's guide.
1. Important information
The Nokia Car Handset HSU-4 replaces the CUW-3 input device supplied
with the Nokia 610 car kit phone.
This user's and installation guide supplements the user's guide
belonging to the scope of supply of the Nokia 610 car kit phone.

2. Mounting the handset

The handset comes with a mount that is to be fixed in a suitable location
where it is easily accessible for the user.
Remember that all equipment must be mounted so that it does not
interfere with the operation of the vehicle. Check to make sure that
deployment of the airbag is not blocked or impaired in any way.
With ignition off, remove the cable connection from the CUW-3 input
device to the radio unit and insert the handset cable in the appropriate
socket in the radio unit (see diagram title page).
The best location to mount the handset is horizontally on the console
between the driver's and front passenger's seats.
Contact your service technician for further detailed information on
alternatives for mounting the handset suitably in your vehicle.
©
Copyright
2004 Nokia. All rights reserved.
3

Advertisement

loading

This manual is also suitable for:

Cuw-3