Table of Contents
Advertisement
Create a new landmark category
On the categories tab, select
Edit
categories.
GPS data
GPS data is designed to provide route
guidance information to a selected
destination, position information about
your current location, and traveling
information, such as the approximate
distance to the destination and
approximate duration of travel.
Select
Menu
Applications
>
and
GPS
data.
Route guidance
Route guidance shows the straightest
route and the shortest distance to the
destination, measured in a straight line. It
ignores any obstacles on the route, such
as buildings and natural obstacles, or
differences in altitude. Route guidance is
active only when you move. Start the
route guidance outdoors to receive the
necessary information from the satellites.
Select
Menu
Applications
>
and
GPS data
> Navigation.
Set your destination
Select
Options
>
landmark as the destination, or enter the
latitude and longitude coordinates.
Clear the destination
Select
Stop navigation
Retrieve position information
You can view the position information
of your current location and an estimate
of the accuracy of the location.
© 2010 Nokia. All rights reserved.
Options
Location
>
Location
>
Set destination
Select
Menu
and
GPS data
>
Save your current location as a
landmark
Select
Options
Landmarks can be used in other
compatible applications and transferred
between compatible devices.
Trip meter
With the trip meter, you can calculate
the distance, speed, and time of your trip.
Use the trip meter outdoors to receive a
better GPS signal.
Select
Menu
and
GPS data
Start calculating the trip distance
Select
Options
values remain on the display.
Start a new calculation
Select
Options
distance and time and average and
maximum speeds to zero.
Set the odometer and total time to
zero
Select
Options
and a
The trip meter has limited accuracy, and
rounding errors may occur. Accuracy can
also be affected by availability and quality
of GPS signals.
Positioning settings
Positioning settings define the methods,
server, and notation settings used in
positioning.
Positioning (GPS)
Applications
>
>
> Position.
Save
position.
>
Applications
>
>
Trip
distance.
>
> Start. The calculated
> Reset. This sets the trip
> Restart.
71
Location
Location
Advertisement
Table of Contents
