•
Module PIN request
using services provided by the security module. Key in the code and select On.
To disable this request, select Off.
•
Change module PIN
module. Enter the current module PIN code and then enter the new code twice.
See also
Access codes
on page 15.
Certificates
There are three kinds of certificates: server certificates, authority certificates and
user certificates.
To view the available certificates, press
Services, Settings,
Security settings
• Server certificates
The phone uses a server certificate to improve security in the connection
between the phone and the gateway. The phone receives the server certificate
from the service provider before the connection is established and its validity is
checked using the authority certificates saved in the phone. Server certificates
are not saved.
The security indicator
transmission between the phone and the Internet server is encrypted.
However, the security indicator does not indicate that the data transmission
between the gateway and the content server (place where the requested
resource is saved) is secure. It is up to the service provider to secure the data
transmission between the gateway and the content server.
Copyright
to set the phone to ask for the module PIN code when
to change the module PIN code, if allowed by the security
Menu
and
User certificates
is displayed during a connection, if the data
©
2003 Nokia. All rights reserved.
in standby mode and select
or
Authority
certificates.
143