Voice Commands; Add A Voice Command To An Application - Nokia 6670 User Manual

• VOICE COMMANDS

Select Menu > Tools > Voice com..
Options in Voice commands are
New application, Playback, Change, Delete,
and Exit.
You can use voice commands to start applications and profiles, and to dial
numbers from Contacts, without having to look at the phone display. You
record a word, or words, (voice command) and then say this voice command to
open an application, activate a profile, or dial a number.
You can have only one voice command per item. Any spoken words can be a
voice command.
When recording, hold the phone at a short distance away from your mouth.
After the starting tone, say clearly the word, or words, you want to record as a
voice command.
Voice commands have the same requirements as voice tags. Before recording a
voice command, see "Requirements for voice tags" on page 36.
Note: You must say the voice command exactly as you said it when
you recorded it. This may be difficult in, for example, a noisy
environment or during an emergency, so you should not rely solely
upon voice commands in all circumstances.

Add a voice command to an application

1 In Voice commands, scroll to the application to which you are adding a
voice command, and select Options > Add voice command. To add a voice
command to a profile, you must have the Profiles folder open and a specific
profile selected.
Press 'Start', then speak after tone is displayed.
2 Press Start to record a voice command.
The phone sounds a starting tone, and the note Speak now is displayed.
3 Say the voice command.
The phone will stop recording after approximately 5 seconds. After recording,
the phone plays the recorded command. Voice command saved is displayed,
and a beep sounds. A symbol
If you do not want to save the recording, press Quit before the recording stops.
Add voice command, Open,
Delete all, Help,
can be seen next to the application.
82 Copyright © 2005 Nokia