Store A Feature Code - Nokia 6265 User Manual

S e t t i n g s
Automatic—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
Automatic A—The phone automatically searches for service in another digital
network. The roaming rate applies when not in the home service area.
Automatic B—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
Mode
If supported by your wireless service provider, you can choose whether your
phone will use digital or analog service. In the standby mode, select
Settings > Network
Digital preferred—You prefer to make calls on a digital network, but will find
another network, if necessary.
Analog only—You can make and receive calls on an analog network only.
Analog per call—You can select an analog network on a call to call basis.
IS-95 per call—You can select an IS-95 network on a call to call basis.
Digital only—You can make and receive calls on a digital network only.
■ Network services
The following features are network services. See also "Network services," p. 5.

Store a feature code

Network feature setting
using feature codes received from your service provider.
1. In the standby mode, select
Network feature
2. Enter the feature code from your service provider (for example, *900 for
activating Forward if
3. Select Call forwarding.
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if
86
> Mode and one of the following.
allows you to activate network services in your phone
Menu >
setting.
busy), and select OK.
busy), select Activate.
Settings > Network services
Menu >
>